Sensors
A sensor is the part of a measuring system that is directly affected by what is being measured — heat, light, pressure, motion — and turns that effect into a signal, usually a voltage or current, that electronics can read and digitise. Every sensor has limits: its resolution, its measurement uncertainty and the calibration that links its readings to real values. A camera's CCD, which won a share of the 2009 Nobel Prize in Physics, is a grid of millions of light sensors.
Metrological vocabulary (VIM)
- Sensor (VIM 3.8): element directly affected by the phenomenon carrying the quantity to be measured.
- Measuring transducer (VIM 3.7): device whose output has a specified relation to its input.
- Calibration (VIM 2.39): relate standards' values (with uncertainties) to indications, then use that relation to obtain results.
- Resolution (VIM 4.14): smallest change in the quantity causing a perceptible change in the indication; may depend on noise or friction.
- Measurement uncertainty (VIM 2.26): non-negative parameter characterising the dispersion of attributed values.
Calibration estimates the instrument's response f, then inverts it to recover the measured quantity from the indication y.
Systems combine many sensors. GPS has space, control and user segments: satellites broadcast their position and time, the control segment adjusts satellite clocks and orbits, and the receiver calculates a three-dimensional position and the time.
Full explanation — the complete reference version every reading depth is based on
What a sensor does
The International Vocabulary of Metrology defines a sensor as the element of a measuring system that is directly affected by the phenomenon carrying the quantity to be measured — for example the sensing coil of a platinum resistance thermometer, the rotor of a turbine flow meter or the float of a level gauge. In engineering, a sensor typically produces a voltage or current that represents the property measured, such as speed, temperature or flow.
From the world to numbers
- Sensing element: a physical effect changes something measurable (resistance, charge, voltage).
- Transducer: produces an output with a specified relation to the input (thermocouples, strain gauges, pH electrodes are examples).
- Conversion: the electrical signal is turned into digital numbers a computer can process.
- Calibration: comparison with measurement standards turns raw indications into trustworthy values.
Light sensors: the CCD and CMOS
A charge-coupled device (CCD) is a silicon chip holding a grid of photocells. Through the photoelectric effect, light knocks electrons free, and more light frees more electrons. The charges are read out row by row and translated into digital ones and zeros, one value per pixel. Willard Boyle and George Smith outlined the idea in 1969 and shared half of the 2009 Nobel Prize in Physics for it. CMOS sensors use the same photoelectric effect but read each photocell out where it sits.
A sensor's image capacity; 1280 × 1024 = 1 310 720 pixels, about 1.3 megapixels.
Sensing position: GPS
A GPS receiver works out where it is from signals sent by satellites. The satellites fly about 20 200 km up, circle the Earth twice a day and broadcast one-way signals giving their position and the time. The constellation is arranged so that at least four satellites can be seen from virtually anywhere on Earth, and the receiver uses their signals to calculate its three-dimensional position and the time.
Good measurements
- Resolution: the smallest change in the measured quantity that causes a perceptible change in the reading.
- Uncertainty: a non-negative parameter describing the spread of values reasonably attributed to the measured quantity, including systematic effects.
- Calibration: relating readings to standards with known uncertainties, so that indications become measurement results.
Worked example (our calculation): a phone camera sensor 4000 pixels wide and 3000 tall has 4000 × 3000 = 12 000 000 pixels, i.e. 12 megapixels. More pixels raise the number of samples, but each pixel's accuracy still depends on noise and calibration.
How we know
The words sensor, transducer, calibration, resolution and uncertainty have agreed international meanings, published in the International Vocabulary of Metrology (VIM) by the bodies behind the SI. The CCD account comes from the Nobel committee, and the GPS facts from GPS.gov, the US government's official GPS information site.
Assumptions and limits
A sensor's reading is only as good as its calibration, and resolution can be limited by noise or friction. A camera's pixel values depend on noise and calibration as well as on light, and a GPS receiver depends on receiving signals from enough satellites — which is why the constellation is arranged so that at least four are in view from virtually anywhere.
Ask ScienceVerse
Still curious about Sensors? Ask a question, get hints, take a short lesson or try a challenge. The tutor answers only from this concept's approved sources, and says so when it has none.
Ask the tutor about this concept on the full tutor page.
Connections
Guided learning path
See everything to learn before this, in order, with your progress:
Related concepts
- Telescopes — Related to
- Semiconductors — Application of
- Robotics — Part of
- Light — Application of
- Electricity — Application of
- Telescopes — Applied in
- Computer vision — Applied in
Check your understanding
Take a quick check of two to five questions, with an explanation for every answer:
Sources and methodology
- In metrology, a sensor is the element of a measuring system that is directly affected by a phenomenon, body or substance carrying the quantity to be measured, such as the sensing coil of a platinum resistance thermometer. (awaiting scientific review)
- International Vocabulary of Metrology (VIM, JCGM 200:2012), entry 3.8: sensor — Government or standards body
- A measuring transducer is a device used in measurement that provides an output quantity having a specified relation to the input quantity; thermocouples, strain gauges and pH electrodes are examples. (awaiting scientific review)
- International Vocabulary of Metrology (VIM, JCGM 200:2012), entry 3.7: measuring transducer — Government or standards body
- In automation and instrumentation usage, a sensor is a device that produces a voltage or current output representative of a physical property being measured, such as speed, temperature or flow. (awaiting scientific review)
- NIST CSRC Glossary: sensor — Government or standards body
- Calibration establishes a relation between the values, with uncertainties, provided by measurement standards and the corresponding indications of an instrument, and then uses that relation to obtain measurement results from indications. (awaiting scientific review)
- International Vocabulary of Metrology (VIM, JCGM 200:2012), entry 2.39: calibration — Government or standards body
- The resolution of a measuring instrument is the smallest change in the quantity being measured that causes a perceptible change in its indication. (awaiting scientific review)
- International Vocabulary of Metrology (VIM, JCGM 200:2012), entry 4.14: resolution — Government or standards body
- Measurement uncertainty is a non-negative parameter characterising the dispersion of the values attributed to a measured quantity, and it includes components arising from systematic effects. (awaiting scientific review)
- International Vocabulary of Metrology (VIM, JCGM 200:2012), entry 2.26: measurement uncertainty — Government or standards body
- A CCD image sensor is a silicon chip of light-sensitive photocells in which, through the photoelectric effect, more light frees more electrons; the collected charges are read out row by row and translated into digital values, one per pixel. (awaiting scientific review)
- Willard Boyle and George Smith shared half of the 2009 Nobel Prize in Physics for the invention of an imaging semiconductor circuit, the CCD sensor. (awaiting scientific review)
- The Nobel Prize in Physics 2009 — Summary — Science media
- An image sensor's capacity is its width in pixels multiplied by its height in pixels, so a CCD with 1280 × 1024 pixels has about 1.3 megapixels. (awaiting scientific review)
- CMOS image sensors also use the photoelectric effect, but whereas the electrons gathered in a CCD are shifted out in line to be read, every photocell in a CMOS sensor is read out on site. (awaiting scientific review)
- CCDs transformed astronomy: the Hubble Space Telescope's wide-angle camera combined four sensors of 0.64 megapixels each for 2.56 megapixels, and the Kepler satellite carried a 95-megapixel mosaic sensor. (awaiting scientific review)
- GPS consists of a space segment, a control segment and a user segment; the satellites transmit one-way signals giving their current position and time, and a GPS receiver uses those signals to calculate its three-dimensional position and the time. (awaiting scientific review)
- GPS: The Global Positioning System — Government or standards body
- GPS satellites fly in medium Earth orbit at an altitude of about 20 200 km and circle the Earth twice a day; the baseline 24-slot arrangement lets users view at least four satellites from virtually any point on the planet. (awaiting scientific review)
- GPS Space Segment — Government or standards body
Claims marked “awaiting scientific review” cite the sources listed but have not yet been signed off by a scientific reviewer.
Content status: published 1 October 2026.
- Scientific review: this version has not yet been signed off by a scientific reviewer.
- The Advanced explanation has not yet been reviewed for age suitability.